What if GOING GREEN also meant KEEPING GREEN as in dollars in your pocket? 

 

What if Moravec Geothermal could help you reduce your carbon emissions by up to 70% while at the same time saving you up to 70% on your heating and cooling costs? If this sounds too good to be true it’s not. This is being accomplished all over the world by installing a (GSHP) ground source heat pump connected to a Ground Loop or Open Loop system that uses the earth’s energy as a heat source in the winter or a heat sink in the summer. Visit www.Geoexchange.org a geothermal consortium to learn more and find other helpful links.

We even practice what we preach by enjoying the cost savings at our corporate offices and the other benefits associated with a ground source heat pump installation. With today’s volatile market and the unpredictable costs of fossil fuels we can’t think of a better investment. With a properly engineered installation you can expect to see an instant savings with a 3 to 7 year pay off. After the pay off you have the potential of pocketing up to 70% of your past heating and cooling expenses. If you can find a better investment please let us know. On February 9, 2018 the President signed the continuation of the 30% tax credit for the installation of a residential (GHP) Geothermal Heat Pump. All commercial and private buildings are eligible for a 10% grant in lieu of tax credit for the total cost of installing geothermal systems Jan 1, 2022. Be sure to check NYSERDA, your state and local government for additional incentives. Some electric suppliers also offer a reduced service rate for a geothermal installation. Visit www.dsireusa.com for federal and state incentives.

Moravec Geothermal has accredited installers as well as a geologist and engineer available for consult on your geothermal Heating Ventilation and Air Conditioning project. We have the equipment and knowledge to assist in all geothermal applications including residential, commercial, industrial and institutional installations. We have the capability to assist in the installation of OPEN and CLOSED LOOP systems ranging from the smallest to largest application. See examples of residential loops below.

 

HORIZONTAL LOOPS
Often used when adequate land surface is available. Depending on the geothermal system needs and space available, pipes are placed in trenches that range in lengths from 100 to 400 feet.

VERTICAL LOOPS
The ideal choice for a geothermal heat pump when available land surface is limited. Well drilling equipment is used to bore small-diameter holes ranging from 150 to 400 feet deep. Some large scale applications can require deeper bore holes.

LAKE or POND LOOPS
Pipe loops are placed on the bottom of the body of water in order to capture the geothermal energy. Size and depth of the pond will have to be considered.

OPEN LOOPS ( PUMP and DUMP )
By drilling a new well or utilizing an existing well your Ground Source Heat Pump uses the earths energy stored in the groundwater. The groundwater is pumped through the heat pump where heat is extracted in the winter or rejected in the summer, then disposed of in an appropriate manner. Considering that groundwater stays at a relatively constant temperature year-round, it is an excellent heat source/heat sink.

STANDING COLUMN WELL SYSTEM
Another form of an open loop system where groundwater is extracted from the bottom of your well, circulated through your heat pump's heat exchanger, and returned to the top of the water column in the same well.

Celebrating 84 Years

Continuing to Serve 12 Counties in the Rochester Area and Finger Lakes Region of Central New York State.

4 Generations of Quality Drilling Successful Wells Since 1934

_________________

 

Counties in New York State Serviced

Monroe, Wayne, Livingston, Ontario, Seneca, Schuyler, Yates, Chemung, Steuben and parts of Tompkins, Broome, Cayuga and Allegany Counties